What to do if the vacuum pump is overloaded by the plasma surface treatment of the vacuum plasma cleaner:
Plasma surface treatment system is the general term for plasma surface treatment equipment. When the control interface of the vacuum plasma cleaner displays the information: When the vacuum pump is overloaded, please check the equipment circuit and vacuum pump, and the system will be overloaded. So, what should be done to protect the vacuum pump of vacuum plasma cleaner from overloading?
 All system parameters need to be strictly controlled. For many years, Chengfeng Zhizao has been committed to the research, development and production of plasma surface treatment systems. It also has its own experience in solving the problem of vacuum pump overload protection. Help, different equipment settings are different. If you need to repair, please consult a professional.

How to judge whether it is a vacuum pump overload protection:
In the alarm interface of the vacuum plasma cleaner, when the information shows that the vacuum pump is overloaded, it can be preliminarily judged that the vacuum pump has an overload protection problem.
Description of the process for solving the problem of vacuum pump overload protection:
1. You can try to click the "Reset" button on the alarm interface to cancel the alarm.
2. After clicking the "Reset" button to cancel the alarm, we need to check whether the parameters of the vacuum plasma cleaner have been reset to zero. If possible, we will run the test in manual mode after resetting the settings to see if it has returned to normal.
3. If the system parameters have not changed, reconfirm whether the thermal relay has automatic protection, press the reset button at this time, and then turn on the vacuum generation system. If there is no automatic protection, you need to check the line.
4. Check whether the oil color in the vacuum pump of the vacuum plasma cleaner has deteriorated and turned black. This check can be performed by observing the oil color through the oil color monitoring window of the vacuum pump. If the oil color turns black, the special oil color for the vacuum pump needs to be replaced.
5. Check whether the vacuum pump motor of the plasma cleaner is stuck. You can use a screwdriver to move the fan blade of the motor to see if it can be moved. Personnel to perform repairs.
If you have any questions about the overload protection alarm of the vacuum pump of the plasma surface treatment system, please click the online customer service of Chengfeng Zhizao, and Chengfeng Zhizao is waiting for your call!