Power supply

Name	Automatic On-Line (shaft wheel type) AP plasma processing systemEffective processing height
Model	CRF-APO-500W-W
220V/AC,50/60Hz
Power	2set*1000W/25KHz(Option)
Processing width	50mm-500mm（Option）
Effective processing height	5-15mm
Processing speed	0-5m/min
Transmission mode	Anti-static insulated roller
Number of print heads	2(Option)
Working gas	Compressed Air(0.4mpa)

Scope of application

Automatic On-Line (shaft wheel type) AP plasma equipment is mainly used in the electronic industry for mobile phone shell printing, coating, dispensing and other pre-processing, surface treatment of mobile phone screens; surface cleaning of electrical connectors; screen printing in general industries , Transfer printing pre-processing, etc. Plasma processing system technology promotes the rapid development trend of semiconductor materials and optical industry production, and is widely used in many high-tech industries such as precision machinery and equipment, automobile industry, new energy technology, aerospace and pollution control. The key to the plasma cleaning process of the plasma treatment system is the use of low-temperature plasma. The key to low-temperature plasma is caused by external conditions such as high temperature, high frequency, and high energy. It is a gaseous substance with neutral, high-energy, and ionized gas. The kinetic energy of low-temperature plasma is about tens of electron volts, and it contains ions, electrons, free radicals, and other special active particles, as well as ultraviolet rays and other substances. This kind of particles can easily react with the molecular structure of pollutants on the surface of the material, so that It separates out, so it can be cleaned up. Because the energy of low-temperature plasma is much lower than that of high-energy rays, this method only involves the surface layer of the raw material and does not easily affect the properties of the material.
The automatic plasma equipment is a dry processing technology that uses electrocatalytic reactions to provide a low-temperature environment, and also eliminates harmful substances and waste water formed in the chemical water treatment process. It is safe and reliable, and is beneficial to environmental protection. Plasma cleaning combines plasma physics, plasma chemistry and material surface phase reflection, which can effectively eliminate residual organic air pollutants on the surface of the material, ensuring that it will not be affected by the surface and its own characteristics. At this stage, it has replaced the traditional wet method. Replacement method for cleaning up.
The automatic plasma equipment technology mainly uses the plasma effect to act on the surface of the material, causing a series of physical and chemical reactions, using special active particles and high-energy rays to reflect and collide with the molecular structure of organic chemical air pollutants on the surface. Produce small molecules of volatile substances, which are removed from the surface to achieve a cleaning effect. It can be seen that plasma cleaning technology has the advantages of simple process, high efficiency, environmental protection and energy saving, and environmental protection and pollution-free.
According to different reaction types, automatic plasma equipment can be divided into two categories: plasma physics cleaning, which uses special active particles and high-energy rays to bombard to separate pollutants; plasma chemical treatment, which uses active particles and residue molecules to react to separate pollutants Things.
1. Unlike the traditional solution cleaning, the plasma uses the "active effect" of the higher-energy chemicals contained in it to clean the surface of the material. The actual cleaning effect is significant, which is a peel-off cleaning. Its removal effect is specifically manifested in the following aspects:
2. It can solve a variety of materials and has low requirements for cleaning goals, so it is very suitable for materials that are not resistant to high temperatures and solvent-based materials;
3. After cleaning, there is no need for dryness or other processes, no waste water, no gas pollution during work, and environmental protection safety;
4. The actual operation is simple and easy to control. The vacuum cleaner does not require a high vacuum value. An atmospheric plasma cleaning process can also be used. In addition, it can prevent the use of a lot of solvents, so the cost is low.
Automatic plasma equipment, regardless of the material type of the target to be processed, has an effective processing effect on semiconductor materials, metal materials and most polymers, and can maintain the overall, partial and complex structure cleaning. The cleaning process can be automated and intelligent, and a high-precision control system can be installed to accurately control the time. In addition, plasma cleaning technology is widely used in the fields of electronic appliances, surface modification materials and active materials due to its simple use, high precision, and strong predictability.
Whether the plasma activation treatment equipment does not produce waste gas and waste water is more environmentally friendly
Speaking of plasma treatment equipment, waste gas treatment plasma photolysis purifier, metal welding and cutting plasma arc welding machine, product material surface treatment plasma activation treatment equipment belong to the category of plasma treatment equipment, what do you have about plasma activation treatment equipment understood? Is there any waste water that emits waste gas? Should it be more environmentally friendly and safer?
Activation treatment equipment is a kind of plasma treatment equipment such as surface treatment and modification treatment of special materials and products. Plasma is generated by means of gas glow or sub-glow discharge, which can achieve different treatment purposes. Generally, there are two commonly used plasma cleaners, one is low-pressure vacuum plasma activation treatment equipment, and the other is atmospheric plasma activation treatment equipment. Different from the wet method in the chemical treatment process, the treatment process of the plasma activation treatment equipment is How to understand the dry processing process? In short, the gases used in plasma activation processing equipment are usually common gases such as oxygen, nitrogen, compressed air, etc., without the use of organic chemical solutions. Most of the gases generated during the processing, such as carbon dioxide and other harmless gases, are due to the reactants Both the product and the product are gases, and there is no need for drying and waste water treatment. Therefore, there is no waste gas and waste water in the waste water treated by the plasma cleaning machine.

Is the activation treatment equipment environmentally safe? As far as the reactants and production organisms are concerned, it is indeed more environmentally friendly and energy-saving, and in terms of the production process, the production process is simpler and safer. In addition, in terms of daily treatment costs, Only a small amount of electricity and consumable maintenance costs are required.