The working principle and main components of the wide-width plasma cleaning equipment are analyzed:
The wide-format plasma cleaning equipment is composed of a plasma processing host, a transmission mechanism, a speed ratio and a control unit. It is mainly used for the coding of PE and silicone rubber cables. The pretreatment of the rubber sealing strip can improve the coding ink and the coding layer. Compounding power to improve product quality. The wide-width plasma cleaning equipment is an online processing equipment that can realize rapid and continuous surface modification of materials. It is a fast, environmentally friendly and energy-saving green surface treatment process.
The working principle of wide-width equipment is as follows:

The wide-amplitude plasma generator generates high-voltage and high-frequency energy, and generates low-temperature plasma during nozzle activation and glow discharge control. The plasma is sprayed onto the surface of the workpiece with compressed air, when the plasma is in contact with the surface of the processed object , Produce chemical and physical changes, make the surface clean, remove oil, additives and other hydrocarbon dirt, and change the surface molecular chain structure according to the material composition. In the coating, free radical groups such as hydroxyl and carboxyl groups are established, which can promote the bonding of the coating and optimize the bonding process between the coating and the group. Using wide-width plasma treatment, under the same effect, a very thin high-tensile coating surface can be obtained.
The plasma flow of the wide-width plasma cleaning equipment is neutral, uncharged, and will not cause damage to the material. After plasma treatment, the surface performance continues to be stable, and the maintenance time is longer. It adopts dry process, no pollution, no waste water, and meets environmental protection requirements. It can be processed online to reduce production costs. The processing speed protection control point can be set freely to prevent damage due to long material processing time caused by low speed or shutdown.